A programmable compact control mechanism for ultra-low power current-mediated CMOS imager

Fang Tang*, Amine Bermak

*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

A novel ultra-low power control mechanism is presented for Mega-pixels current-mediated CMOS imagers . Within the proposed technique, the operating readout pixel and reset pixel are located in the same column, controlled by only 2-bit lines/pixel compared with 4-bit in previous reported design . The number of transistors for each pixel is reduced from the standard 6 transistors to 4 in the current design . Because the read-out and reset modes are separated into two phases in series for the proposed mechanism, only one reference current source is used, by which the power consumption can further be saved and also the chip area would be shrunk. Minimum wiring overhead is required in the proposed pixel as two control lines are removed. Furthermore, a programmable electronic shutter is adopted to adjust the integration time. The proposed design is simulated using TSMC 0.18um technology, with more than 80% fill factor for a 17 × 17um2 pixel dimension.

Original languageEnglish
Title of host publication2009 1st Asia Symposium on Quality Electronic Design, ASQED 2009
Pages280-283
Number of pages4
DOIs
Publication statusPublished - 2009
Externally publishedYes
Event2009 1st Asia Symposium on Quality Electronic Design, ASQED 2009 - Kuala Lumpur, Malaysia
Duration: 15 Jul 200916 Jul 2009

Publication series

Name2009 1st Asia Symposium on Quality Electronic Design, ASQED 2009

Conference

Conference2009 1st Asia Symposium on Quality Electronic Design, ASQED 2009
Country/TerritoryMalaysia
CityKuala Lumpur
Period15/07/0916/07/09

Keywords

  • CMOS imagers
  • Current-mediated pixel
  • Programmable electronic shutter

Fingerprint

Dive into the research topics of 'A programmable compact control mechanism for ultra-low power current-mediated CMOS imager'. Together they form a unique fingerprint.

Cite this