Die wear in stamping of advanced high strength steels - Investigations on the effects of substrate material and hard-coatings

Ömer Necati Cora; Ali Agcayaz; Kunio Namiki; Hasan Sofuoglu; Muammer Koç

doi:10.1016/j.triboint.2012.02.016

Die wear in stamping of advanced high strength steels - Investigations on the effects of substrate material and hard-coatings

Ömer Necati Cora, Ali Agcayaz, Kunio Namiki, Hasan Sofuoglu, Muammer Koç^*

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

62 Citations (Scopus)

Abstract

This study intended to investigate the wear performance of different coatings (two different PVD, a CVD, and a TD coating) applied onto variety of substrate materials (DC 53, SKD 11, DRM 3, DRM 51) against AHSS sheet blanks. A non-reciprocating, CNC-based, slider type of tester was employed in wear tests. In effect of coating study, it was found that TD coated samples performed slightly better than the other samples. The substrate material effect study, on the other hand, revealed that the TD coated DRM 3 and DRM 51 die samples attained the lowest specific wear rate.

Original language	English
Pages (from-to)	50-60
Number of pages	11
Journal	Tribology International
Volume	52
DOIs	https://doi.org/10.1016/j.triboint.2012.02.016
Publication status	Published - Aug 2012
Externally published	Yes

Keywords

AHSS sheet
Hard coatings
Stamping die
Wear test

Access to Document

10.1016/j.triboint.2012.02.016

Cite this

@article{209d8ae9e8b14899b2d81167b8fc3fdf,

title = "Die wear in stamping of advanced high strength steels - Investigations on the effects of substrate material and hard-coatings",

abstract = "This study intended to investigate the wear performance of different coatings (two different PVD, a CVD, and a TD coating) applied onto variety of substrate materials (DC 53, SKD 11, DRM 3, DRM 51) against AHSS sheet blanks. A non-reciprocating, CNC-based, slider type of tester was employed in wear tests. In effect of coating study, it was found that TD coated samples performed slightly better than the other samples. The substrate material effect study, on the other hand, revealed that the TD coated DRM 3 and DRM 51 die samples attained the lowest specific wear rate.",

keywords = "AHSS sheet, Hard coatings, Stamping die, Wear test",

author = "Cora, {{\"O}mer Necati} and Ali Agcayaz and Kunio Namiki and Hasan Sofuoglu and Muammer Ko{\c c}",

year = "2012",

month = aug,

doi = "10.1016/j.triboint.2012.02.016",

language = "English",

volume = "52",

pages = "50--60",

journal = "Tribology International",

issn = "0301-679X",

publisher = "Elsevier Inc.",

}

TY - JOUR

T1 - Die wear in stamping of advanced high strength steels - Investigations on the effects of substrate material and hard-coatings

AU - Cora, Ömer Necati

AU - Agcayaz, Ali

AU - Namiki, Kunio

AU - Sofuoglu, Hasan

AU - Koç, Muammer

PY - 2012/8

Y1 - 2012/8

N2 - This study intended to investigate the wear performance of different coatings (two different PVD, a CVD, and a TD coating) applied onto variety of substrate materials (DC 53, SKD 11, DRM 3, DRM 51) against AHSS sheet blanks. A non-reciprocating, CNC-based, slider type of tester was employed in wear tests. In effect of coating study, it was found that TD coated samples performed slightly better than the other samples. The substrate material effect study, on the other hand, revealed that the TD coated DRM 3 and DRM 51 die samples attained the lowest specific wear rate.

AB - This study intended to investigate the wear performance of different coatings (two different PVD, a CVD, and a TD coating) applied onto variety of substrate materials (DC 53, SKD 11, DRM 3, DRM 51) against AHSS sheet blanks. A non-reciprocating, CNC-based, slider type of tester was employed in wear tests. In effect of coating study, it was found that TD coated samples performed slightly better than the other samples. The substrate material effect study, on the other hand, revealed that the TD coated DRM 3 and DRM 51 die samples attained the lowest specific wear rate.

KW - AHSS sheet

KW - Hard coatings

KW - Stamping die

KW - Wear test

UR - http://www.scopus.com/inward/record.url?scp=84860512274&partnerID=8YFLogxK

U2 - 10.1016/j.triboint.2012.02.016

DO - 10.1016/j.triboint.2012.02.016

M3 - Article

AN - SCOPUS:84860512274

SN - 0301-679X

VL - 52

SP - 50

EP - 60

JO - Tribology International

JF - Tribology International

ER -

Die wear in stamping of advanced high strength steels - Investigations on the effects of substrate material and hard-coatings

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this