ID EM modeling for onshore hydrocarbon detection using MATLAB

H. M. Zaid; N. B. Yahya; M. N. Akhtar; M. Kashif; H. Daud; S. Brahim; A. Shafie; N. H.H.M. Hanif; A. A.B. Zorkepli

doi:10.3923/jas.2011.1136.1142

ID EM modeling for onshore hydrocarbon detection using MATLAB

H. M. Zaid, N. B. Yahya, M. N. Akhtar, M. Kashif, H. Daud, S. Brahim, A. Shafie, N. H.H.M. Hanif, A. A.B. Zorkepli

Universiti Teknologi Petronas

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

Abstract

Controlled Source Electromagnetic (CSEM) is a new technique used for hydrocarbons detection. This study focuses on One dimension (ID) modeling of hydrocarbon detection for onshore application using the principles of electromagnetic (EM) waves propagation. The transmitted frequency which is 0.25 Hz was used to characterize the hydrocarbon at 500 m, 1000 m and 1500 m. Electric fields detected by the receivers at 500, 1000 and 1500 m were 22.85, 20.4 and 17.1 V m^-1, respectively which was determined by using ID simulation. This non-seismic ID modeling may provide alternative solution for hydrocarbon (HC) detection for oil and gas industry.

Original language	English
Pages (from-to)	1136-1142
Number of pages	7
Journal	Journal of Applied Sciences
Volume	11
Issue number	7
DOIs	https://doi.org/10.3923/jas.2011.1136.1142
Publication status	Published - 2011
Externally published	Yes

Keywords

1-D modeling
Electric field strength
Electromagnetic
Hydrocarbons

Access to Document

10.3923/jas.2011.1136.1142

Cite this

@article{4eb46b28fdce432c8f1da2d5693a6e0b,

title = "ID EM modeling for onshore hydrocarbon detection using MATLAB",

abstract = "Controlled Source Electromagnetic (CSEM) is a new technique used for hydrocarbons detection. This study focuses on One dimension (ID) modeling of hydrocarbon detection for onshore application using the principles of electromagnetic (EM) waves propagation. The transmitted frequency which is 0.25 Hz was used to characterize the hydrocarbon at 500 m, 1000 m and 1500 m. Electric fields detected by the receivers at 500, 1000 and 1500 m were 22.85, 20.4 and 17.1 V m-1, respectively which was determined by using ID simulation. This non-seismic ID modeling may provide alternative solution for hydrocarbon (HC) detection for oil and gas industry.",

keywords = "1-D modeling, Electric field strength, Electromagnetic, Hydrocarbons",

author = "Zaid, {H. M.} and Yahya, {N. B.} and Akhtar, {M. N.} and M. Kashif and H. Daud and S. Brahim and A. Shafie and Hanif, {N. H.H.M.} and Zorkepli, {A. A.B.}",

year = "2011",

doi = "10.3923/jas.2011.1136.1142",

language = "English",

volume = "11",

pages = "1136--1142",

journal = "Journal of Applied Sciences",

issn = "1812-5654",

publisher = "Asian Network for Scientific Information",

number = "7",

}

TY - JOUR

T1 - ID EM modeling for onshore hydrocarbon detection using MATLAB

AU - Zaid, H. M.

AU - Yahya, N. B.

AU - Akhtar, M. N.

AU - Kashif, M.

AU - Daud, H.

AU - Brahim, S.

AU - Shafie, A.

AU - Hanif, N. H.H.M.

AU - Zorkepli, A. A.B.

PY - 2011

Y1 - 2011

N2 - Controlled Source Electromagnetic (CSEM) is a new technique used for hydrocarbons detection. This study focuses on One dimension (ID) modeling of hydrocarbon detection for onshore application using the principles of electromagnetic (EM) waves propagation. The transmitted frequency which is 0.25 Hz was used to characterize the hydrocarbon at 500 m, 1000 m and 1500 m. Electric fields detected by the receivers at 500, 1000 and 1500 m were 22.85, 20.4 and 17.1 V m-1, respectively which was determined by using ID simulation. This non-seismic ID modeling may provide alternative solution for hydrocarbon (HC) detection for oil and gas industry.

AB - Controlled Source Electromagnetic (CSEM) is a new technique used for hydrocarbons detection. This study focuses on One dimension (ID) modeling of hydrocarbon detection for onshore application using the principles of electromagnetic (EM) waves propagation. The transmitted frequency which is 0.25 Hz was used to characterize the hydrocarbon at 500 m, 1000 m and 1500 m. Electric fields detected by the receivers at 500, 1000 and 1500 m were 22.85, 20.4 and 17.1 V m-1, respectively which was determined by using ID simulation. This non-seismic ID modeling may provide alternative solution for hydrocarbon (HC) detection for oil and gas industry.

KW - 1-D modeling

KW - Electric field strength

KW - Electromagnetic

KW - Hydrocarbons

UR - http://www.scopus.com/inward/record.url?scp=79953318654&partnerID=8YFLogxK

U2 - 10.3923/jas.2011.1136.1142

DO - 10.3923/jas.2011.1136.1142

M3 - Article

AN - SCOPUS:79953318654

SN - 1812-5654

VL - 11

SP - 1136

EP - 1142

JO - Journal of Applied Sciences

JF - Journal of Applied Sciences

IS - 7

ER -

ID EM modeling for onshore hydrocarbon detection using MATLAB

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this