TY - JOUR
T1 - Refractive Index of Engine-Emitted Black Carbon and the Influence of Organic Coatings on Optical Properties
AU - Hu, Dawei
AU - Alfarra, M. Rami
AU - Szpek, Kate
AU - Langridge, Justin M.
AU - Cotterell, Michael I.
AU - Flynn, Michael J.
AU - Shao, Yunqi
AU - Voliotis, Aristeidis
AU - Du, Mao
AU - Liu, Dantong
AU - Johnson, Ben
AU - McFiggans, Gordon
AU - Haywood, Jim M.
AU - Coe, Hugh
AU - Allan, James
N1 - Publisher Copyright:
© 2023. The Authors.
PY - 2023/8/27
Y1 - 2023/8/27
N2 - Refractive indices (RI) of particles are important in determining their radiative forcing. We measured optical coefficients of particles classified according to their aerodynamic diameter, allowing retrieval of RI using a Mie model. At 405 nm, the RI of BC from a diesel engine was 1.870 (+/- 0.132) + 0.640 (+/- 0.015) i. The RI of secondary organic aerosol (SOA), using a-pinene and o-cresol as precursors, were 1.584 +/- 0.015 and 1.738 (+/- 0.021) + 0.0316 (+/- 0.0018) i, respectively. Neither SOAs demonstrated absorption at 660 nm and their RIs were 1.551 +/- 0.011 and 1.586 +/- 0.011, the similar value suggesting that a single RI may be sufficient for simulating the radiative forcing of SOA at this wavelength. In addition, organics were condensed onto BC to test optical models for coated particles. For BC particles coated with non-absorbing organics, the extinction is predicted accurately by all models. The absorption is significantly over-estimated by core-shell, volume mixing, and effective medium approximations and under-estimated by external mixing. For BC particles coated with weakly absorbing organics, the extinction and absorption are best described by external mixing when the coating ratio is less than 2.5. When the coating ratio is over 2.5, the difference between the external mixing predictions and measurements increases with the coating ratio. Our results show that the absorption of coated BC particles may not be predicted accurately based solely on the equivalent diameter, coating ratio, and pure component RIs, and considerations of additional factors such as morphology may be necessary.Black carbon (BC) and brown carbon (BrC) are extensively investigated components of atmospheric aerosol due to their ability to absorb solar radiation and contribute to atmospheric heating, resulting in a positive radiative forcing. Although BC and BrC are very important for climate, they are poorly represented in atmospheric models. This is in part due to the lack of accurate refractive index (RI) descriptions for both BC and BrC. Previous studies have used mobility selection approaches to select BC/BrC particles upstream of optical spectroscopy instruments to allow RI characterizations, but these retrievals suffer from issues caused by multiple charging. We solved this issue by using a new aerosol classification technique, enabling optical measurements for an aerosol sample classified according to a single physical size without multiple charge artifacts, which improves the subsequent RI retrieval. In addition, non-absorbing and weakly absorbing organic materials were condensed onto BC to form coated soot particles, allowing different optical models for mixed particles to be evaluated. We found that the absorption of coated BC particles may not be predicted with sufficient accuracy from knowledge of only the equivalent diameter, coating composition, and RI, and considering additional factors such as morphology may be necessary for accurate predictions.
AB - Refractive indices (RI) of particles are important in determining their radiative forcing. We measured optical coefficients of particles classified according to their aerodynamic diameter, allowing retrieval of RI using a Mie model. At 405 nm, the RI of BC from a diesel engine was 1.870 (+/- 0.132) + 0.640 (+/- 0.015) i. The RI of secondary organic aerosol (SOA), using a-pinene and o-cresol as precursors, were 1.584 +/- 0.015 and 1.738 (+/- 0.021) + 0.0316 (+/- 0.0018) i, respectively. Neither SOAs demonstrated absorption at 660 nm and their RIs were 1.551 +/- 0.011 and 1.586 +/- 0.011, the similar value suggesting that a single RI may be sufficient for simulating the radiative forcing of SOA at this wavelength. In addition, organics were condensed onto BC to test optical models for coated particles. For BC particles coated with non-absorbing organics, the extinction is predicted accurately by all models. The absorption is significantly over-estimated by core-shell, volume mixing, and effective medium approximations and under-estimated by external mixing. For BC particles coated with weakly absorbing organics, the extinction and absorption are best described by external mixing when the coating ratio is less than 2.5. When the coating ratio is over 2.5, the difference between the external mixing predictions and measurements increases with the coating ratio. Our results show that the absorption of coated BC particles may not be predicted accurately based solely on the equivalent diameter, coating ratio, and pure component RIs, and considerations of additional factors such as morphology may be necessary.Black carbon (BC) and brown carbon (BrC) are extensively investigated components of atmospheric aerosol due to their ability to absorb solar radiation and contribute to atmospheric heating, resulting in a positive radiative forcing. Although BC and BrC are very important for climate, they are poorly represented in atmospheric models. This is in part due to the lack of accurate refractive index (RI) descriptions for both BC and BrC. Previous studies have used mobility selection approaches to select BC/BrC particles upstream of optical spectroscopy instruments to allow RI characterizations, but these retrievals suffer from issues caused by multiple charging. We solved this issue by using a new aerosol classification technique, enabling optical measurements for an aerosol sample classified according to a single physical size without multiple charge artifacts, which improves the subsequent RI retrieval. In addition, non-absorbing and weakly absorbing organic materials were condensed onto BC to form coated soot particles, allowing different optical models for mixed particles to be evaluated. We found that the absorption of coated BC particles may not be predicted with sufficient accuracy from knowledge of only the equivalent diameter, coating composition, and RI, and considering additional factors such as morphology may be necessary for accurate predictions.
KW - Black carbon
KW - Brown carbon
KW - Optical properties
KW - Refractive index
UR - http://www.scopus.com/inward/record.url?scp=85168576990&partnerID=8YFLogxK
U2 - 10.1029/2023JD039178
DO - 10.1029/2023JD039178
M3 - Article
AN - SCOPUS:85168576990
SN - 2169-897X
VL - 128
JO - Journal of Geophysical Research: Atmospheres
JF - Journal of Geophysical Research: Atmospheres
IS - 16
M1 - e2023JD039178
ER -